Thursday, March 4, 2010

New Employee

DbBrad's latest helper, Evan.




Above, Evan shows off his pliers (it's really a crescent wrench!)
Below, Evan has more tools than my crew!




Evan helps me fix his bike. We raised the seat which was rusted but in such a way that he helped at every stage and may be able to do it himself next time. He may need to upgrade his tools from polycarbonate to steel though!

Another Moch up

Here is the mock up for a new project. It's actually going to be an architectural deer fence at the entrance to a beautiful home situated on property overlooking Bush Point.



The idea evolved from a metal post fence with welded wire mesh I came upon when inspecting a barn being salvaged. The barn had giant posts and 3x16 cedar planks. Responding to the material's attributes, I decided to span further and to hang very heavy metal panels (old boiler plates). There would be three panels in each bay with spacing between them.

The barn wood sold before I got there, but the idea didn't die.


With a few scraps of Lois's gutter chain, the last piece of Fairground metal (see: Lois screens, FrEdLey siding, and Island County Fairground roofing), a 6x6 from the wood pile, two blocks of those infamous spruce 2x8's originally from FrEdLey project, and flashing to mimic angle iron, we worked this up.


The budget is very tight so we are now looking at adapting our design without disrupting our language. Canvas panels hand-dyed by the artist owner might contribute a beautiful temporary panel in the frame work until the steel panels can be squeezed into the budget. This idea sparked from my new and ingenious collapsible steel job sign utilizing no fasteners other than bungee loops. A blog posting will follow.

dbBrad is Design Build Brad

South Porch Details



Following are a few shots of the south porch during the 5 days of it's construction by Matt.

Pictures: 1)-The lightness of the porch 2)-As much light below the roof as above! 3)-profile view showing deck, steel pole, roof and board walk over wetland.


Our schematic design evolved during the course of construction as Lois and I continued to contemplate her needs and wants, scope of work, cost, and materials.



As a result of availability of recycled materials, the south side deck evolved. We had many 20' 2x4's from demolition of the original deck. 10' was a great length for decking so that drove the deck size. The old deck was 12' wide, so having a deck 6' deep also meant no waste--and a perfect size anyhow--just big enough to enter and to house a small table and chair.


Using the last of our beautiful 2x6's from Two Dog Timberworks, remnants of steel poles from the other porch, and the 1x2's from the do-it-yourself arbor we demolished, we only had to purchase 3 sheets of Lexan, 4x10' for the lid and one 12' D.F.#1 6x6 for the beam.


But, the porch was not on the plans. Correctly, the County wants to make sure it's safe. So now, off to engineering.

4)-showing that the hole is at least 36" deep, 16" around and dug in solid undisturbed soil. 5)- the construction of the deck with a permanent temp beam 6)-the 4x10 bolting deck framing to steel poles with three 3/8" x 4' lags. 7)- Matt and Dog working hard.


The picture with the dog probably is the most descriptive. It clearly shows an "Another Project by dbBrad" sign. Also note the 2x6 ledger with the Simpson roll strap pre-nailed to the back side and the bolt detail on the pole Matt is carrying. And, in compliance with County regulations, the dog is on a leash!


8)-Brad torques the 1/2" x 7" bolt to secure the beam to the 2 1/2" steel pipe colums.
9)- and 10)-Matt nailing off the Simpson straps and attaching the 2x4 perlins.



Matt's 200# + on a single rafter. The fir from Two Dog Timberworks is easily twice as strong as that from the lumber store. Matt shaved 3/16" off the end of the rafters so the Lexan and flashing wouldn't be effected by the simpson straps on top of the rafters.

11)- the house not too long after we started. The roof and skylight had already been done.

Will it stand up. That's what the great team at Reed and Associates Engineers are going to tell us.

Garbage Fence


Here is a pile of lumber which normally would have been dumpsterized. It came in the form of pallets with our roofing order. The wood is fir and hemlock, roughly milled but fairly free of knots and I hated to chuck it. So Joe pulled hundreds of little ring shanked nails and stacked the wood until...


...One day Lois and I were looking at the neighbors' rubbish and recycling piles thinking it would be nice if her fence went all the way to the corner. Ding ding--I knew instantly what to do!

Later the next day Joe had the posts in, had cut a few 2x4's left over from deck salvage and had nailed up the pallet wood. The shingle wall had been hanging out since we cut in the doors on the south side (studio porch) and was simple installed between two posts to define the corner.


The neighbors didn't seem to mind looking at their rubbish, but they expressed dissatisfaction with looking at the back of a shingled wall. Ding ding ding--

Having recently done the recycled metal screens, I asked Joe to grab all the cut-offs from the panels and "shantytown" the back. An hour later the wall was done and the neighbors were happy.




Using recycled materials and scraps;
Allowing for changes to occur;
Constantly re-evaluating needs and costs;
The design build process working at it's best!!


dbBrad is Design Build Brad.

Lil' Table

A Brand new History!

This red painted wood with the white edge used to be a stair tread at Asilomer Conference Center in California. When I visited, many years ago, they were replacing the steps (I'm not quite sure why) and to get more wood in the dumpster they were pulling it and stacking it. This is one of the pieces I was able to retrieve before the Ranger came and spoke to us of liability issues. He did let us keep the pieces we already had loaded!


The metal stand was in the cottage at my Bellingham residence. It held a narrow tank of water off the ground, just enough to set up a convection loop around the wood stove. The wife and two kids lived in the cottage for several years during WWII and this was their only source of hot water. Cold showers during the summer I think!



5 minutes with a wire brush grinder- $7.50
8 minutes with a planer and sander- $13.00
45 seconds to cut top and place on base $1.78
A life time of ideas and exploration by designer - Priceless!

dbBrad is Design Build Brad

Tuesday, March 2, 2010

Welcome!


The new front door is another "blur-the-edge" feature of this remodel. From inside, through the door, the garden is beautifully featured. And, from the outside, one gets a peak of the inviting inside spaces. The result is a welcome to friends to come in; or to go out.


Outdoor Spaces


Blending the indoor and outdoor spaces improves the aesthetics of a home as well as its livability. The screens added to this home, once softened on both sides with plantings, will create private, nestled, and inviting places to enjoy the garden as well as provide great views of the garden from inside. Blurred edges extend an almost irresistible invitation to enjoy both the interior and exterior spaces.


Before the remodel there was no separation from the street. The home lacked complexity. The garden was an uninviting large grassy area. The function, both inside and out, was weak.

By adding screens the lines of the home are extended into the garden. With the weaving of plants in-and-out between the screens, creating privacy and beauty, outdoor "rooms" are formed. The once too-close street vanishes from one's vision and mind.

The photo, directly above, shows the existing deck and propane tank enclosure reworked, replacing plastic trellis enclosures, with a more creative, architectural, and permanent-in-appearance material while extending the screen-look from front-to-back. The repetition of materials enhances the overall continuity.

The screens were built of recycled roofing from the barn at the Island County Fair.