Monday, March 1, 2010

Too much Light!

Structural failure, but not disaster!!



It appears that with all the light in Lois's house, the big red flower (Amaryllis) grew more than it should have and toppled over.

Top, looking across the steel table towards the front door.
Below, looking up from the floor at the bottom of the table, light fixture and skylight.





The sturdy stem appears to have detached from the side of the bulb in an effort to hold up 5 of the amazing flowers. Amazingly enough, the foil wrapped coffee can base didn't tip over.


Exterior Spaces

Blurring the division between interior and exterior is a trademark of our work. By pulling the architecture of the dwelling into the garden one effectively brings the garden into the house.


Even without any plants, the wetland flows under the bridge and the deck has intimacy. The little recycled 2x4 bridge begs one to walk across and sit on the porch.


Creating a simple covered space allow one to linger at this transition between interior and exterior. It also allows the room to 'borrow' space from the yard. Lois's studio feels bigger with the deck extending the spaces, even with the doors closed. During the summer months, the doors will be open most of the time.




Being too open can be a problem too--lack of privacy and no sense of security. The screens provide a distinction of zones, where public to private can transition seamlessly without barriers.

Above, the 100% recycled deck, downspout and screens. Simplicity and honesty of materials at it's best.
Below, the road beyond the screen feels like it's over there and the space off the deck feels enclosed.



Thursday, February 25, 2010

Making the Machine

Having worked in a smaller community most of my career, I've come to take for granted honest responsible people with skills commensurate with hourly rate...but after an unnecessarily expensive electrical nightmare on a simple remodel, I have new appreciation for qualified professional help.


Above-Jimmy of Irish Welding in his shop with Lois's 5' x 5' table sub-structure underway.

Jimmy of Irish Welding is one of those great/qualified locals. He did a great job working with me developing details for the steel counters and helping me solve the issues of the 'machine' . He's knowledgeable, easy to work with and has a fully stocked shop!




Above-a picture of the machine when the idea was still a bit fuzzy!
Below-Prebending the cold rolled rod for the spiral wrap



He also was very generous in letting us work with him in his shop to help control costs. It was a nice design build process. Between myself designing details and resolving issues and Jimmy's expertise in welding and know how and Josh's hard work and extra set of hands, we made quite the object out of another object from the dump!




Above, my hand moving as fast as my thoughts!! Below, 'the machine' being installed.




Jimmy's craftmanship assured strong connections, tidy welds and accuracy where needed. It's a 'wing it' process but good help and a solid design process makes all the difference. Everything worked and fit perfect!




Above-Joe, Matt, Josh and Brad setting the table top on the 'machine'. Photo by Lois Masin.

Magic Plumber

Steve of SouthSide Plumbing has worked out very well. He is competent, confident and willing to try things differently to accommodate my desire for a better product.




Here he is working his magic. I'm tired of wasted spaces under sinks. I decided to make Lois's under sink an experiment and choreographed the plumbing of hot cold water, dishwasher supply and return and waste drain and vent in order to get two drawers under the sink.




He looked at me like I was crazy when I asked if he could keep all the plumbing in the back 2.5" of the cabinet--but he did it!!




Here you can see the two drawers under the sink, full depth and providing lots of storage. Towel rack and sponge bob on the back side of drawer faces!



Thanks Steve and Southside Plumbing!

Finding Homes

I commented the other day that I built Lois's house out of Garbage. Or at least what would have been garbage 15 years ago. That is to say that as recent as last decade we, as a nation, were burning wonderful wood, burying metals without even recycling, and hauling a massive pile of
materials to the dump after every project.



We've hauled 3 truckloads to the dump for an entire renovation of house and garden! This pile of old fascia and pipe salvaged from the Wise project and scraps of flashing has shrunk and continues to await its new purposing.



We used all the lumber from roofing pallets, disassembled decks and walls plus other house parts we demoed. We pulled nails from scraps I used from my last job and we still have a pile of wood left. It's being cut up for stakes and supports for supporting a fence during construction.



We've even found homes for the materials we can't re-use. Some to thrift shops, some donated to a kid's tree-house. The old upper cabinets were delivered to Seattle and the lowers, along with the sink and faucet, to Langley.



Were trying to find homes for the products we don't like such as the Pergo strips we salvaged and this white arbor. We're so committed to recycling Joe's been maintaining ads on Craig's List where we offered any takers one dollar (we give you a dollar) to take this garden thing away.



This concrete sink is still available. Small cracks but usable--a nice casting with a copper edge.

Wednesday, February 24, 2010

The Machine

The machine started out as a tractor implement for aerating soil/lawn. It probably spent a decade acquiring moss and liken and flakes of rust at Island Recycling.

The kitchen shown with Lois's old table as a temp, holding the space where the 'Machine' will go and the custom made Front Door by dbBrad and Island Sash and Door.

After a quick pass thru my brain, a couple hours with Jimmy of Irish Welding and a few more iterations, the design came together.

My favorite is that the helix shape we generated by wrapping cold rolled rod around the fingers of the existing implement not only ties in with the spiral of the heating coils but will match the 8" smooth curve simplistic drawer handles.

Right, Brad custom fitting the 'Machine". Below, Brad, Joe and Josh hold up the 5' x 5' steel table. Warping can be a problem with the welded edge detail, but Jimmy did a great job keeping it clean and flat.

Because the table is at counter height and is so big, the top and the base had to be disassembleable. Simple connections made of parts of
the machine we had to cut off and scraps from Irish Welding's recycled inventory provided attachments for the top, feet for the bottom, and supports for the heater coils.


Below, placing the top on the 'Machine'













Lois has been a very trusting client. I've kept her informed of my design directions, involved her in the evolution of the designs and assured her when necessary, such as on the Machine Table. I'm not sure she had any idea what was coming her way in this case but she Loves it and that's what counts.


Sunday, February 21, 2010

A Stunning Kitchen


This crisp, stylish kitchen just gets better and better as the details are added one-by-one. Lois picked out a dramatic yellow sink; the existing vinyl window has been cleverly trimmed with dark flashing to match the new aluminum window; and the simple foil cabinets work and look terrific.


The metal counter tops are dynamite with the stainless appliances and the recycled fir flooring sets it all off perfectly.

Just wait for the Island table and the front door, coming this week!