Friday, December 25, 2009

Thank you Santa

Just what I always wanted. A big bad truck, more powerful than any others, sound echoing through the wilderness at my arrival but with a perfectly quite, air conditioned interior of leather seats and crystal clear audio.

And now I have one. It's only a 150 for economy. To get better economy, I put bigger wheels on so that every time the engine goes around I'll go a little further.

By not actually needing roads, I can shorten my commuting by taking more direct routs.

And it's funny, but maybe there is therapy to be had in pretending. Wanting something enough to put in the time to create a full mental construct.

That is what I do with schematic design. I dream up ideas that solve problems, I render them and encourage through discussion, drawings, models and presentation, my clients to 'live it'. Walk through the doors. Sit at the table. Look out the window.

And so my practical side won't let me have a truck like this. But I can pretend, without expense to the environment or myself, that I have a giant one ton diesel truck workhorses jacked up and rendered useless for hauling or towing or even longevity because I've tricked it out to be fast, noisy and destructive.

I admit--I wish I could justify a truck like this-the luxury of pushing around 8,ooo pounds of steel with a motor that's wastes 80% of it's embodied energy, just to impress my clients. But allas, I continue to strive to get closer to sustainability and when the Europeans have an average consumption of 116 gallon per year per capita, I just don't think I'd be happy with my truck parked 350 days a year.

But armed with the power of unlimited immagination, I can experience this ego-building sensation too. It weighs only 5 lbs (my truck, not my ego). At one tenth scale (the wheels then being 54" in diamter and the fuel tanks each hold 92 gallons), it's just big enough to be a funormant for my truck. That's a hood ornament you can have fun with!

Window Wrap 2

Window Wrap, part two.

Left-I particularly like that the wall was partially sided allowing the Vycor flashing to shed any water that may come down/through/around the window (don't forget about condensation) well out over the moisture barrier to the weather face of the shingles.


Before I ever place a window, I like to make sure the sill and the framing are protected. On commercial projects quite often a soldered pan is used with an up return on the inside, positive slope to the outside and appropriate counter flashing.

Considering the 52" overhang just 4' above on Lois's house, I thought this combination of tar paper (30#) and Vycor was more than sufficient.


Left-The 'butterfly'. A simple strip (cut from scrap or end of roll) that is stretched out to seal up the pinhole in the corner left, no matter how carefully you did your tar paper and flashing.
Right-Joe demonstrates his excellent eye sight and attention to detail as he places the Milgard aluminum window.

Once the window is installed and level, we nail or screw it off, depending on siding/trim details. Don't nail the top because when the building moves/settles, you don't want your glass to break.

Then, the primary waterproofing is applied to the bottom first, then the sides. This is a piece of tape that seals to the continueous flange of an aluminum or vinyl window and goes beyond the holes that will be made nailing up the trim. Then the top flashing would be installed-however in this case (see part 1) there was no need.

Right-Joe applies the primary waterproofing, pealing back the paper as he goes and working in the direction of gravity.


The shingles will be fit directly up to the aluminum window which has about a 1- 1/4" protrusion from the sheathing. The shingles at their thickest are only 7/8".

I wouldn't normally use shingles (never on a roof) as I prefer my old growth cedar standing. But in small amounts, in the right places (here matching existing), they can be very effective. With the overhangs, these shingles will look good and protect the wall assembly for 50 years easy.

Left-Joe performs two tests simultaneously. One, demonstrating how to peel the paper off the Vykor, the other looking directly at the flash so we could test the red eye on my new Panasonic Lumix.

Window Wrap 1

Being a designer by nature has disadvantages. One being it's the primary or eventual topic of nearly every conversation I engage in. As a result, here I sit on x-mass morning with the great company of friends and family, having the morning dedicated to nothing in particular, and I decide to do a blog posting!

This is of a window wrap I recently did. There are as many ways to try to water proof a window as there are manufactures of windows. Water damage is a huge concern making up the bulk of architectural law suits. Poor drainage, rotting walls, mold, wet insulation and eventually stain and mildew on the inside surface of the drywall and pealing paint on the outside can cause the home owner and the builder grief if not properly handled at the time of construction.

Code's have been adopted relating directly to this issue. You're now required to tape all openings (framing to moisture barrier) prior to window installation. This helps, but all the tape and tar paper in the world won't guarantee a water proof window or dry sheathing. This comes from proper detailing based on construction types and materials and skilled assembly by someone capable of being a drip -- of water!

One must be able to trace, in their mind, the drip of water down the siding, to the top of the window, around the corners, down the sides to the sill and hopefully back over the siding or primary moisture barrier.

Top- the top of the window needs no flashing as it's tucked up under a 2x piece of trim. It's also under a 52" eve/overhang so is protected from direct water even on the lee-ward side.

Right-Joe of dbBrad pulls the 30# (I don't believe 15# felt is of value. It's thinner, wears out more quickly and seems to be less saturated with resin and is about 80% the cost-not much savings for far less protection) paper taut and staples it into the opening, trimming remainder. I like to do this after the paper has been up, wrinkled, stretched, shrunk, etc. If the tar paper is at all pooched, it can hold off the window, siding and trim.

In this case, I chose to shingle the wall prior to window installation as Milgard needed 6 weeks to get me an aluminum window but progress on the wall needed to happen.

For remainder of water proofing details, see Window Wrap 2.

Thursday, December 24, 2009

dbBrad crew

We like to have fun. Here, prior to the grueling task of sanding and finishing the floors, we take a moment to enjoy our work, the beautiful wood grain of cvg fir, and the wonderful dwelling we're creating for Lois.

Front to Back: Matt, Brad, Joe

Joe Walks on Water

Joe, always a pleasure to have as an employee, demonstrates again his ability to perform almost impossible tasks.

Some days seem more impossible than others, but we try to have fun on our job sites.





Break being over, he rapidly returns to work!

Ice and bubbles

Just some random shots by me, Brad Hankins of dbBrad during the cold week we had early December.

I recently purchased a Panasonic Lumix with the Leica 10x lens and love it. I'm enjoying photography again for the first time since taking 3000 slides in Europe and not knowing what to do with them!



These photographs are of ponds frozen, bubbled, drained, frozen again and again over several cycles until the ice seemed to capture a network of bubbles, leaves, rocks and layers frozen in time.

Above: a rock and plants captured in the ice, macro. Right: concentric circles in plan view, puddle anywhere.


Here the bubbles are the same ones I pondered over this summer in the FrEdLey pond, wondering if fish, decaying leaves or some other biological process was the effects of a few bubbles a minute trapped in time.











And the Best bubbles yet, compliments if John and Re-Assemblage. A process of finding, assembling and distributing, for a cause, recycled objects disguised as art.


Below: Fran and Ed of FredleyonWhidbey.blogspot.com are the proud foster parents of this piece.

Friday, December 18, 2009

Transformations...

mess outside while the floor finishing is happening...



But, pretty rewarding to see this...



Especially, when this was just recently the look with appliances in the studio and furniture in the garage...